HP Maintenance Message Reset

Posted on Sunday, 31 August 2008 by ariefew

To clear the Maintenance Service Message from the LCD display:

HP IIISi Printers:

Press ONLINE until the light goes off
Hold down MENU until PCL CONFIG MENU appears
Press the MENU key until SERVICE MSG=ON* appears
Press the + or – key to change display to SERVICE MSG=OFF
Press ENTER/RESET MENU key to turn message off, the * should appear, then press
ONLINE

HP 4Si Printers:

Press ONLINE until the light goes off
Press MENU until CONFIG MENU appears
Press the ITEM key until SERVICE MSG=ON* appears
Press the + or – key to change display to SERVICE MSG=OFF
Press the ENTER key to turn message off, the * should appear, then press ONLINE

HP 5Si:

Press MENU key 4 times for CONFIG MENU
Press ITEM to display SERVICE MESSAGE=OFF
Press ENTER
Press ONLINE

HP 4000/4050/4100/5000 Printers:

Turn the printer off
Hold down the left side of the ITEM and VALUE +/- keys, turn the printer on
and wait until RESET MAINTENANCE COUNT is displayed and then release the keys

HP 4500/4550 Printers:

Turn the printer off
Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait
until the display goes blank and the three LED’s come on
Press the right side of the MENU key, then press the SELECT key
You will enter SERVICE MODE after the normal test completes
Press the ITEM key until the FUSER MAINTENANCE COUNT appears
Press VALUE +/- to change to zero
Press SELECT to save
Press GO; the printer should return to READY

HP 8000/8100/8150 Printers:

Press the MENU button until the display reads CONFIGURATION MENU
Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
Select OFF*
Press SELECT to save
Turn printer off
Hold the VALUE MINUS and ITEM MINUS buttons while turning the printer back on
Hold buttons down until display reads RESET MAINT/COUNTand then release both
buttons

HP 9000 Printers:

Turn the printer off
Press and hold the CHECK key
Power on the printer
Release the CHECK key after all three lights come on The display should read
SELECT LANGUAGE
Press the up arrow until MAINTENANCE KIT is displayed, then press the CHECK
key again and the maintenance kit count has been reset

HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):

Press the MENU button until the RESETS MENU is displayed
Press the ITEM button until TRANSFER KIT SELECT IF DONE is displayed
Press the SELECT button

HP Color LaserJet 4500/4550 Printers (FUSER KIT RESET):

Press the MENU button until the RESETS MENU is displayed
Press the ITEM buton until FUSER KIT SELECT IF DONE is displayed
Press the SELECT button
Press the GO button to return to READY

HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):

After Maintenance is performed, the display should read NEW TRANSFER KIT =
Press the down arrow to highlight YES, then press the CHECK button to reset
Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose
NEW TRANSFER KIT and select

HP Color LaserJet 4600 Printer (FUSER KIT RESET):

After Maintenance is performed, the display should read NEW FUSER KIT =
Press the down arrow to highlight YES, then press the CHECK button to reset
Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose
NEW FUSER KIT and select

HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):

Press the MENU button until the RESETS MENU is displayed
Press the ITEM button until RESET TRANSFER LIFE COUNT is displayed
Press the SELECT button to reset, then GO to return to READY

HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):

Press the MENU button until the RESETS MENU is displayed
Press the ITEM buton until RESET FUSER LIFE COUNT is displayed
Press the SELECT button to reset
Press the GO button to return to READY

Filed under: Komputer, Tools | Tagged: canon, catatanku, computer, epson, error, HP, Komputer, Modifikasi, Modify, printer, refill, repair, reparasi, reset, resetter, Tools, waste tank ink | 2 Comments »

HP Waste Ink Tank Reset

Posted on Sunday, 31 August 2008 by ariefew

The newer Hewlett Packard printers have included in the software that comes
with their printers, a “toolbox” that includes a section called Estimated
Ink Level. Its a great tool that allows you to keep track of how much ink is
left in your cartridges so you don’t start a big print job and get stranded
out of ink in the middle of it. The only problem is that has become quite troublesome
on those who wish to refill their cartridges. If you refill your cartridge or
have someone else refill your cartridge, it will read as low or empty when you
try to print with the cartridge. How does HP do it? They started embedding a
serial number in the contact strip located on the back of the cartridge. The
printer remembers that serial number and gives the message of low or out of
ink. The internal memory is located in the printers firmware and is not in the
software. It will remember the previous two cartridges ink level. We have posted
various ways to reset the ink levels so your Estimated Ink Level will read full
again. Click on your printer cartridge number below to find out how.

Reset the HP C6656A (#56) or HP C8727A (#27):

Reset Method 1:

1. Refill your cartridge using your Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering
the only the light blue colored contact (a contact is the individual copper
square). Make sure that only that contact is covered and no others. *Please
note that the contacts shown are colored for illustrative purposes only. You
will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a
problem with your cartridge. Ignore this message. The printer may print an alignment
page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact
on the cartridge. Place another piece of tape over the red colored contact.
Make sure that only that contact is covered and no others. *Please note that
the contacts shown are colored for illustrative purposes only. You will not
have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining
tape off and place back in the printer. The printer should print out an alignment
page and the estimated ink level in the toolbox should read full.

Reset Method 2:

If Reset Method 1 did not work on your printer, you can cycle cartridges through
to reset the level. You will need two extra cartridges and the one you refilled.
First, put the refilled cartridge in the printer. Allow it to recognize the
cartridge and print an alignment page. Take that cartridge out and place in
the first extra cartridge. Allow it to recognize and print an alignment page.
Take the first extra cartridge out and place the second extra cartridge in.
Allow it to recognize and print an alignment page. Take the second extra cartridge
out. Place the refilled cartridge back in the printer. It will print an alignment
page and then the estimated ink level will be reset to full.

Reset the HP C6657A (#57) or HP C8728A (#28):

Reset Method 1:

1. Refill your cartridge using your Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering
the only the blue colored contact (a contact is the individual copper square).
Make sure that only that contact is covered and no others. *Please note that
the contacts shown are colored for illustrative purposes only. You will not
have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a
problem with your cartridge. Ignore this message. The printer may print an alignment
page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact.
Place another piece of tape over the red colored contact. Make sure that only
that contact is covered and no others. *Please note that the contacts shown
are colored for illustrative purposes only. You will not have blue or red contacts
on your cartridge.

5. Follow step 3 again.

Reset Method 2:

Reset the HP 51645 (#45) or HP C6115 (#15):

Reset Method 1:

1. Refill your cartridge using your Ink Jet refill kit.

3. Place cartridge in the printer. The printer may tell you that there is a
problem with your cartridge. Ignore this message. The printer may print an alignment
page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue
contacts. Place the tape over the four red colored contacts. Make sure that
only those four are covered and no others.

5. Follow step 3 again.

Reset Method 2:

If Reset Method 1 did not work on your printer, go through the same procedure
again, but this time using the green colored contacts in step 2 and the brown
colored contacts in step 4. This method is more commonly used for the #15 or
in the later officejet printers.

Reset Method 3:

If neither of the reset methods above worked, you can cycle cartridges through
to reset the level. You will need two extra cartridges and the one you refilled.
First, put the refilled cartridge in the printer. Allow it to recognize the
cartridge and print an alignment page. Take that cartridge out and place in
the first extra cartridge. Allow it to recognize and print an alignment page.
Take the first extra cartridge out and place the second extra cartridge in.
Allow it to recognize and print an alignment page. Take the second extra cartridge
out. Place the refilled cartridge back in the printer. It will print an alignment
page and then the estimated ink level will be reset to full.

Reset the HP C6578 (#78):

1. Refill your cartridge using your Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering
the only the four blue colored contacts (a contact is the individual copper
square). Make sure that only those four are covered and no others. *Please note
that the contacts shown are colored for illustrative purposes only. You will
not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a
problem with your cartridge. Ignore this message. The printer may print an alignment
page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue
contacts. Place the tape over the four red colored contacts. Make sure that
only those four are covered and no others. *Please note that the contacts shown
are colored for illustrative purposes only. You will not have blue or red contacts
on your cartridge.

5. Follow step 3 again.

Reset Method 2:

1. Refill your cartridge using your Ink Jet refill kit.

3. Place cartridge in the printer. The printer may tell you that there is a
problem with your cartridge. Ignore this message. The printer may print an alignment
page. If so, allow it to do so.

5. Follow step 3 again.

Reset Method 3:

Resetting the Hewlett Packard C5011A (#14) Black Ink Cartridge Estimated
Ink Level

The new HP OfficeJet D Series and CP 1160 Color Ink Jet series using the #14
black ink cartridges has an estimated ink level gauge that allows the user to
view the amount of ink remaining in the cartridge. This gauge must be shut off
in order to refill the cartridge. It is a simple procedure that can be done
in the matter of seconds.

To turn the ink level gauge off for the HP C5011A (#14) black cartridge used
in the OfficeJet D Series:

1. Refill your cartridge using your Ink Jet refill kit.

2. Press the < and > (also the + and -) at the same time, then release
quickly (the lcd panel must be showing the date or the procedure will not work)

3. On the keypad, press in order 7, 8, 9.

4. A message will appear asking if you want to override the ink level gauge.
Press 1 for yes (You can later turn the ink gauge back on if you install a new
cartridge by going through steps 2 and 3, then pressing 2 when prompted if you
want to override the ink level gauge).

Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5011A (#14) black cartridge used
in the HP Color InkJet CP 1160 Series:

1. Refill your cartridge using your Ink Jet refill kit.

2. Press and hold down the power button.

3. While holding the Power button:

Press the Cancel button 12 times

Press the Resume button 1 time

4. Release the Power button

The ink gauge is now off and you can resume printing

Resetting the Hewlett Packard C5010A (#14) Color Ink Cartridge Estimated
Ink Level

The new HP OfficeJet D-Series and CP 1160 Color Ink Jet series using the #14
color ink cartridges has an estimated ink level gauge that allows the user to
view the amount of ink remaining in the cartridge. This gauge must be shut off
in order to refill the cartridge. It is a simple procedure that can be done
in the matter of seconds.

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used
in the OfficeJet D Series:

1. Refill your cartridge using your Ink Jet refill kit.

2. Press the < and > (also the + and -) at the same time, then release
quickly (the lcd panel must be showing the date or the procedure will not work)

3. On the keypad, press in order 4,5, 6.

Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used
in the HP Color InkJet CP 1160 Series:

1. Refill your cartridge using your Ink Jet refill kit.

2. Press and hold down the power button.

3. While holding the Power button:

Press the Cancel button 12 times

Press the Resume button 3 times

4. Release the Power button

The ink gauge is now off and you can resume printing

click here for more HP Maintenance —> HP Maintenance Message Reset

Epson Waste Ink Tank Reset

Posted on Sunday, 31 August 2008 by ariefew

Pada Printer Epson, untuk mengatasi waste tank ink ini, terdapat
software untuk meresetnya. Software tersebut yaitu Epson Adjustment Software
dan SSC Service Utility.

Adjusment Software merupakan sofware portable untuk mereset
counter printer epson tertentu. Satu Adjusment Sofware untuk satu jenis printer.

SSC Service Utility merupakan sofware untuk utility bermacam-macam
printer epson yang salah satunya reset counter.

Canon Waste Ink Tank Reset

Posted on Sunday, 31 August 2008 by ariefew

Canon Waste Ink Tank Reset Procedures

Canon GENERIC “S” SERIES RESET CODE

Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2)
more times in succession. Note: you are still holding the POWER button). The printer’s carriage will “reset” or move momentarily. If the above was properly performed the printer will enter the “Service Mode”.
(4) Press the RESUME button 4 times, this will select the clear waste ink counter
function. The lamp will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM – Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point – However it is
best leave them unaltered – You have been warned!). After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

++++++++++

Canon i320, i255

Waste Ink Counter Reset.
Step 1 : Manual for service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual for service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.

4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.

5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanent

1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software for permanent reset”

++++++++++

Canon PIXMA iP1000

Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software for permanent reset”

++++++++++

Canon PIXMA iP1500

Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software for permanent reset”

++++++++++

Canon i850, i950, S600

Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses – light color – function
Number of presses – light color – function
0 presses – green – Test print (or exit service mode on i960)
1 press – orange – EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses – green – EEPROM initialize
3 presses – orange – Reset waste ink counter

++++++++++

Canon S450 Printer

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.

3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator
should be orange.
7: Press Power to set data

++++++++++

Canon BJC 1000 Serie

1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++

Canon BJC-2000 BJC-2100 Serie

1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET
.
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++

Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650

Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME

++++++++++

Canon BJC-5000

1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.

3: While the indicator is blinking , Press RESUME twice then Wait until the
printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator
should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.

3: While the indicator is blinking , Press RESUME twice then Wait until the
printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator
should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays
a melody of beeps.

++++++++++

Canon BJC-5100

Self Test
Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.

++++++++++

Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.

3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator
should be orange.
6: Press Power to set data

++++++++++

Canon BJC-600 BJC-600e BJC-610 BJC-620

1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

++++++++++

Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70

1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord

++++++++++

Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer

++++++++++

Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520

Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more
times in succession. (youre still holding the POWER button during this). The
printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME
4 times will select the clear waste ink counter function. The lamp will alternate
color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return
to the top of the function selection menu. Pressing the POWER button again turns
off the printer for a resta

++++++++++

Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950,
PIXMA iP3000 above,

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the
Power button once more.
8. Your printer should respond as normal.

+++++++++

Canon S900, S820, S750, S520

Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
While still holding the POWER button, Release the RESUME button, then press
and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release
the Power Button.
Pressing the RESUME key will select a function; for example, pressing RESUME
4 times will select the clear waste ink counter function. The lamp will alternate
color with each key press.

1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return
to the top of the function selection menu. Pressing the POWER button again turns
off the printer for a restart.

++++++++++

Canon S9000

Turn off printer
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Press Resume button 2 times then let BOTH buttons go.
Green lights will flash and then stop blinking.
When green lights are solid, press the Resume button 4 times.
Press the Power button and the printer should turn off, if not, press the Power
button once more.
Your printer should respond as normal.

+++++++++

Canon MPC190

Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press
the [ON/OFF] key.

Software for Permanent, Download :

Memperbaiki Blinking pada Printer (Waste tank Ink)

Posted on Sunday, 31 August 2008 by ariefew

Kalau kita ingin beli printer baru, pasti pertanyaan kita ” bisakah tintanya
di refill ? ” Itu pasti, untuk pengiritan ! Apalagi sekarang banyak toko-
toko yang menawarkan langsung modif untuk pembelian printer baru.

Tapi dibalik permodifikasian dan merk printer, dibeberapa printer (terutama
yang baru) ada semacam counter untuk menghitung berapa kali kita melakukan
penge-print-an ( 4000x sampai 8000x tergantung vendor ). Hal ini oleh vendor,
dimaksudkan untuk menjaga tempat penampungan bak tinta waktu terjadi cleaning.
Dan apabila bak tinta tersebut waktunya penuh (pengecekan oleh counter=0), harus
dilakukan pembersihan . Hal ini biasa disebut Waste Tank Ink. Waste Tank Ink
pada printer biasanya ditandai dengan adanya blinking (led berkedip).

Bagaimana cara mereparasi ini?